طريقة تنصيب فريم وير 4.1.2 Install Galaxy S3 Mini I8190N DXALL5 Android 4.1.2 Official Firmware

The Hero

الأســــــــــــــطورة

The Hero
إنضم
Jun 29, 2008
المشاركات
20,104
مستوى التفاعل
69
المطرح
في ضحكة عيون حبيبي
رسايل :

شكرًا للأشواك علَّمتني الكثيرَ

طريقة تنصيب فريم وير 4.1.2 Install Galaxy S3 Mini I8190N DXALL5 Android 4.1.2 Official Firmware

الموقع غير مسؤول عن أي مشاكل تصيب الجاهز فنحن لسنا بمطورين ولا مبرمجين أندرويد
أنقر للتوسيع...

نظرة عامة

[h=2]Android 4.1.2 DXALL5 Firmware Overview:[/h]PDA: I8190NDXALL5
CSC: I8190NOLBALL5
Version: 4.1.2
Date: 2012-12-19





طريقة التنصيب

Complete Step-By-Step Instructions:
Step 1 - Download Android 4.1.2 I8190NDXALL5(below) for Galaxy S3 Mini to your computer and extract the zip file.
Step 2 - Download ODIN v1.85 (below) which will help you to install Android 4.1.2 on Samsung Galaxy S3 Mini I8190N.
Step 3 - Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
Step 4 - Make sure you have your Galaxy S3 Mini USB drivers installed on your computer.
Step 5 - Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
Step 6 - If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
Step 7 - Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.


  • [*=left]Click on PDA and select file with CODE in its name.
    [*=left]Click on Phone and select file with MODEM in its name. Ignore this step if there is no such file.
    [*=left]Click on CSC and select file with CSC in its name. Ignore this step if there is no such file.
    [*=left]Click on PIT and select the .pit file. Ignore this step if there is no such file.
Step 8 - In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.
Step 9 - Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
Step 10 - After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.

التحميل
Download Official Firmware :
apkios_icon.png
I8190NDXALL5_I8190NOLBALL5_XME.zip And Download ODIN v1.85

 
يجب تسجيل الدخول أو التسجيل كي تتمكن من الرد هنا.
أعلى